Table of Contents
Advertisement
Optional Equipment
Leg Mounting Kit
NOTE: The legs must be purchased separately.
PACKING LIST
• Two (2) Leg Mounting Plates
• Four (4) 3/8-16 Nuts with 3/8" Washers
INSTALLATION INSTRUCTIONS
N O T E :
Install this kit prior to installing the Sweet Dreams stove.
1
Remove the stove top and face (see the owner's manual for details).
2
Attach the legs (and rubber-tipped leveling bolts) to the leg mounting plates following the directions
below. The clips on the mounting plates insure proper leg alignment.
Leg Mounting Plates
3
Place two pieces of wood (or other spacer, pallet, etc...) behind the stove. Tilt the stove back until it
rests on the wood (see the illustration below). Attach the leg mounting plates (and legs) to the stove.
4
Restore the stove to an upright position, taking care to prevent undue weight on the legs. Once the
stove is in position, unscrew the leveling bolts to level the stove (NOTE: do not slide the stove – this
may damage the bolts or the mounting plates). The rubber tips also prevent noise from vibration.
Travis Industries
(SKU 99500110)
Wood (or other spacer)
1 0 0 - 0 1 1 5 5
(for qualified installers only)
• Four (4) 1/4-20 x 1/2" Bolts with 1/4" Washers
• Four (4) Rubber Tipped Leveling Bolts
Leveling Bolts
4 3
Leg Nuts & Washers
9/16" Wrench
7/16" Wrench
4 0 4 0 9 0 3
Hide quick links:
Advertisement
Table of Contents
