Track In - PRESONUS StudioLive24.4.2 Owner's Manual

4 Controls
4.7 Master Section
Talkback Mic Level
Output Selector Buttons
Talkback Button

4.7.3 2 Track In

2 Track In Volume
Control
Tape Input On/Off
Button
46 46
Controls the Overall Level of the Talkback Mic.
This knob controls the overall volume of the external talkback mic input. The trim
for the Talkback mic is located on the back panel next to the input. See Section 3.1
for details.
Assigns the Talkback Mic to the Aux and/or Main Outs.
These buttons assign the talkback mic to a specified output. These buttons are
toggled on/off and will illuminate indicating that the Talkback output is active. The
talkback mic can be assigned to every output at the same time.
Turns the Talkback Mic On and Off.
This latching button turns the talkback mic on and off. It will illuminate to indicate
that the talkback mic is active.
The 2 Track input allows you to patch in an analog input or a playback stream
from your audio application. This enables you to compare audio sources during
mixdown or patch in intermission music between bands without using any
of your 24 input channels. This is a summing bus, so both the external tape
input and the two-track FireWire return can be engaged at the same time.
Adjusts the Level for the Tape Input.
This knob adjusts the level for both the tape input and the main FireWire return.
Sends the Tape Input to the Main Outputs.
This button patches the Tape input to the main outputs. It will illuminate to
indicate that the Tape input is being sent to the mains. To disable the routing,
simply press the button again.
PreSonus StudioLive ™ 24.4.2