Jam Detection - Ricoh B291 Service Manual

JAM DETECTION

2.2 JAM DETECTION
Mode
Shift Staple
Entrance sensor:
On check
Entrance sensor:
Off check
Tray exit sensor:
On check
Tray exit sensor:
Off check
Stapler tray
entrance sensor:
On check
Stapler tray
entrance sensor:
Off check
Lower tray exit
sensor:
On check
Lower tray exit
sensor:
Off check
*1
Counted by entrance motor pulses because timing differs for feed out.
B545
CÓPIA NÃO CONTROLADA
Jam
The entrance sensor does not turn on within
399 pulse after the main machine exit
sensor turns off.
The entrance sensor does not turn off within
34 pulse after it turns on.
The tray exit sensor does not turn on within
66 pulse after the entrance sensor turns off.
*1
The tray exit sensor does not turn off within
66 pulse after the tray exit sensor turns on.
The stapler tray entrance sensor does not
switch on within 102 pulses after the
entrance sensor switched off.*
The staple tray entrance sensor does not
turn off within 34 pulse after the stapler tray
entrance sensor turns on.*
The lower exit sensor does not on within
1260 ms after the stack feed-out motor turns
on.
The lower exit sensor does not off within
1500 ms after it turns on.
16
CÓPIA NÃO CONTROLADA
Content
*1
*1
1
1
SM