Ricoh B291 Service Manual page 778

Table of Contents

Advertisement

BIT SWITCHES
System Switch 02
No
FUNCTION
0
Not used
2
Force after transmission stall
0: Off
1: On
3
Not used
4
File retention time
0: Depends on User Parameter
24 [18(H)]
1: No limit
5
Not used
6-7
Memory read/write by RDS
Bit 7
6
0
0
0
1
1
0
1
1
System Switch 03
No
FUNCTION
0
Length of time that RDS is
to
temporarily switched on when
7
bits 6 and 7 of System Switch
02 are set to "User selectable"
System Switch 04
No
FUNCTION
0-2
Not used
3
Printing dedicated tx
parameters on Quick/Speed
Dial Lists
0: Disabled
1: Enabled
4-7
Not used
System Switch 05 - Not used (Do not change the factory settings.)
B779
CÓPIA NÃO CONTROLADA
Do not change these settings.
With this setting on, the machine resets itself
automatically if a transmission stalls and fails to
complete the job.
Do not change these settings.
1: A file that had a communication error will not be
Do not change this setting.
(0,0): All RDS systems are always locked out.
Setting
(0,1), (1,0): Normally, RDS systems are locked out,
Always disabled
but the user can temporarily switch RDS on to allow
User selectable
RDS operations to take place. RDS will
User selectable
automatically be locked out again after a certain
Always enabled
time, which is stored in System Switch 03. Note that
if an RDS operation takes place, RDS will not switch
off until this time limit has expired.
(1,1): At any time, an RDS system can access the
machine.
00 - 99 hours (BCD).
This setting is only valid if bits 6 and 7 of System
Switch 02 are set to "User selectable".
The default setting is 24 hours.
Do not change these settings.
1: Each Quick/Speed dial number on the list is
printed with the dedicated tx parameters (10 bytes
each).
The first 10 bytes of data are the programmed
dedicated tx parameters; 34 bytes of data are
printed (the other 24 bytes have no use for service
technicians).
Do not change these settings.
CÓPIA NÃO CONTROLADA
COMMENTS
erased unless the communication is successful.
COMMENTS
COMMENTS
40
SP No. 1-101-003
SP No. 1-101-004
SP No. 1-101-005
SM

Advertisement

Table of Contents
loading

Table of Contents