Adjustment; Shift Tray Height - Ricoh B291 Service Manual

3.2 ADJUSTMENT

3.2.1 SHIFT TRAY HEIGHT

After replacing the finisher board or shift tray height sensor, always do this
adjustment.
1. Remove the upper rear cover.
2. Turn on dip switches 3 -1 and -4 on the finisher board.
3. Put blank paper (A4/8
4. Press switch 1 (SW1) on the finisher board.
The finisher automatically adjusts the shift tray height when switch 1 is pressed.
• After performing the adjustment, the shift tray will return to home position.
• During the adjustment, LED 1 flashes. After performing the adjustment, LED
1 turns on and remains on.
• If the automatic adjustment fails, the finisher stops and LED 1 turns off.
5. Turn off dip switches 3 -1 and -4, then turn off the copier main switch.
SM
CÓPIA NÃO CONTROLADA
SW1
SW2
Dip Switch 3
" 11") on the shift tray.
1/2 x
39
CÓPIA NÃO CONTROLADA
LED 1
LED 2
B546R550.WMF
Dip Switch 3
ON
1 2 3 4 5 6 7 8
B546R551.WMF
ADJUSTMENT
B546