Paper Positioning Mechanism - Ricoh B291 Service Manual

PAPER POSITIONING MECHANISM

2.4 PAPER POSITIONING MECHANISM
[B]
[G]
When the trailing edge of the 1st copy paper passes the 2nd transport roller [A], the
lower exit roller [B] stops and turns reverse. At the same time, the upper guide
plate motor turns on and opens the upper exit guide [C]. The copy paper is sent to
the stopper [D] by the lower exit roller and feed belt [E], and it is aligned the by
jogger motor.
The feed belt solenoid [F] turns on to move the feed belt to the stopper. This
function prevents excessive buckling of the paper between belt and stopper.
The paddles [G] send the paper to the stopper starting from the 2nd copy paper.
When the trailing edge of the 2nd copy paper passes the 2nd transport roller, the
paddle solenoid [H] turns on and the drive from the transport roller transmits to the
paddle shaft.
B546
CÓPIA NÃO CONTROLADA
[C]
[A]
[E]
[D]
B546D105.WMF
B546D108.WMF
6
CÓPIA NÃO CONTROLADA
B546D106.WMF
[G]
B546D111.WMF
[F]
[H]
SM