Installation - Ricoh B291 Service Manual

1.18.2 INSTALLATION

Important
• The DOS SD card must always reside in SD card slot C2 or it can be merged
with the printer/scanner SD card in C1.
• The PostScript3 SD card must always reside in slot C2. If the DOS option is also
required, then move the DOS application to the SD card in slot C1 with SP5873.
(The PS3 option cannot be merged onto any other SD card.)
• For more information about merging applications, refer to the Printer/Scanner
Manual.
1. If the machine is on, turn off the main
power switch.
2. Disconnect the network cable.
3. Turn the main power switch on.
4. Turn the operation switch and main
power switch off.
5. Remove the SD card slot cover [A]
(!x1).
6. With the printed side of the SD card [B]
facing the rear of the machine, install
the SD card in SD card slot C2.
7. Reconnect the network cable, if the
network is connected to the copier.
8. Turn the main power switch on.
9. Do SP5-878 and push [EXECUTE].
10. Go out of the SP mode, turn the operation switch off, then turn the main power
switch off.
Checking and Completing the Installation
Do this procedure to confirm that the data overwrite security feature is enabled and
operating.
1. Turn the machine power on.
2. Do SP5990 005 (Diagnostic Report) to print the diagnostic report
3. Check the diagnostic report.
• Under [ROM No./Firmware Version] you should see "B7355060/0.03"
displayed for "HDD Format Option".
• Under [Loading Program] you should see "GW1a_zoffy: B7355060/0.03"
SM
CÓPIA NÃO CONTROLADA
DATA OVERWRITE SECURITY UNIT (B735)
1-73
CÓPIA NÃO CONTROLADA
[B]
[A]
B735I101.WMF
B291/B295/B296/B297