Ricoh B291 Service Manual page 329

6017* Sheet Through Magnification
Adjusts the magnification in the sub-scan direction for ADF mode.
Use the
6105* Staple Position Adjustment
Adjusts the staple position in the main scan direction when using the two-tray
finisher.
Press
6113* Punch Hole Adjustment
Adjusts the punch hole position.
SP6113 1: 2-hole punches for Japan, North America, Europe, and 4-hole punches
for Northern Europe.
SP6113 2: 3-hole punches for North America, and 4-hole punches for Europe.
Press
6113 1* 2-Holes
6113 2* 3-Holes
6902* Fold Position Adjustment
Allows fine adjustment of the fold position on paper when the Booklet Finisher is
connected and used.
6902 1* A3/DLT
6902 2* B4
6902 3* A4/LT
SM
CÓPIA NÃO CONTROLADA
key to toggle between + and - before entering the value
±
to toggle . A larger value shifts the staple toward the edge of the paper.
±
to toggle . A larger value shifts the holes toward the edge of the paper.
[–7~+7 / 0 / 0.5 mm steps]
[–7~+7 / 0 / 0.5 mm steps]
[-30~+30 / 0 / 0.5 mm]
[-20~+20 / 0 / 0.5 mm]
[-15~+15 / 0 / 0.5 mm]
5-69
CÓPIA NÃO CONTROLADA
SERVICE PROGRAM MODE TABLES
[–50.0 ~ +50.0 / 0.0 / 0.1%/step]
[–3.5~+3.5 / 0.0 / 0.5 mm step]
B291/B295/B296/B297