Sp6-Xxx: Peripherals - Ricoh B291 Service Manual

SERVICE PROGRAM MODE TABLES

SP6-xxx: Peripherals

6006* ADF Registration Adjust
Adjusts the side-to-side and leading edge registration for simplex and duplex
original feeding in ARDF mode. Press
SP6006 5 sets the maximum setting allowed for rear edge erase.
6006 1* Side-to-side
6006 2* Leading Edge (Thin Original)
6006 3* Leading Edge (Duplex Front)
6006 4* Leading Edge (Duplex Rear)
6006 5* Rear Edge Erase
6007 ADF Input Check
6007 1 Group 1
6007 2 Group 2
6007 3 Group 3
6008 ADF Output Check
Switches on each electrical component (ARDF motor, solenoid, etc.) of the ARDF
for testing. (
6009 ADF Free Run
Performs a free run with the ARDF for duplex and stamp testing. Input the number
for the item you want to check, and then press
This is a general free run controlled from the copier. For more detailed free run
modes, see the ARDF manual.
6009 1 Duplex Mode
6009 2 Stamp Mode
6010* ADF Stamp Position Adjustment
Adjusts the horizontal position of the stamp on the scanned originals.
6016* Original Size Decision Priority
Determines which original sizes are detected when an original is detected that is
larger than the size assigned to the original size sensor. This provides an alternate
selection for detection, other than that assigned with SP5131.
B291/B295/B296/B297
CÓPIA NÃO CONTROLADA
[–3 ~ +3 / 0.0 / 0.1 mm step]
[–30 ~ +30 / 0.0 / 0.17 mm step]
[–42 ~ +42 / 0.0 / 0.12 mm step]
[–42 ~ +42 / 0.0 / 0.12 mm step]
[–20 ~ +20 / –3.0 / 0.5 mm step]
Displays the signals received from sensors and
switches of the ARDF.(
5.2.6)
OFF/ON
OFF/ON
[–7~+7 / 0 / 0.5 mm steps]
Japan
Bit
7
North America
Bit
6
5
4
3
Europe
Bit
2
1
0
5-68
CÓPIA NÃO CONTROLADA
to toggle ±.
5.2.5)
to start.
0
DLT SEF
0
DLT SEF
LT LEF
LT SEF
LG SEF
0
DLT SEF
LT SEF
LT LEF
1
11"x15"
1
11" x 15"
US Exec LEF
8"x10" SEF
F4 SEF
1
8-K SEF
16-K SEF
16-K LEF
SM