Output Modes Using Folding Unit Fd-501; Attaching Cover Sheet (Post Inserter On Fd-501) - Konica Minolta bizhub pro C6500P User Manual

Hide thumbs Also See for bizhub pro C6500P:

Table of Contents

Output Applications

Output Modes Using Folding Unit FD-501

Using Folding Unit FD-501, the following punch/folding patterns are

Punch: Punches 2 or 3 holes in printed sheets for filing purposes. Specify the

desired punch position (left/right/top) according to the original set direction.

Folding: Six folding types are available - Z-Fold, Tri-Fold-in, Tri-Fold-out,

Double Parallel, Gate Fold, and Half Fold. Specify the print side (outside or

inside) for each folding mode except Z-Fold.

These folding modes are also available manually for sheets fed from the post

This function is provided by Folding Unit FD-501 mounted with post inserter.

Cover sheets loaded in the upper/lower tray of the post inserter will be

attached to the output sheets as a front cover, back cover, or insertion

(chapter) sheets.

Use this function to create a staple-bound book with covers and title pages

attached. You can also use the Cover With Blank Sheet mode of Booklet

Pagination in combination with Paper inserter function of Insert Sheet to

make a booklet enfolded with a cover sheet.

Paper setting for the covers to be loaded in the post inserter tray is required.

See page 3-18 for details.

Used in combination with the Perfect Binder PB-501, cover sheets loaded in

the post inserter tray can be attached to the output sheets to make perfect-

bound books. See page 6-20 for details on loading covers, and see

page 5-13 for details of perfect binding.

bizhub PRO C6500P

Tri-Fold-out

Double Parallel