Konica Minolta bizhub pro C6500P User Manual page 146

3
– To register the desired custom size:
(1) Touch [Size Setting], then touch [Custom].
(2) Select the lengthwise/widthwise dimension key to highlight it,
then use [+], [,], or touch screen keypad to enter the desired
special size.
Entered size should fall within 140 - 330 mm in lengthwise
dimension, 182 - 487 mm in widthwise dimension.
(3) Similarly, touch the trimming width key to highlight it, then enter
the desired amount. With the Trimming mode selected, the
machine will output printed sets trimmed by the specified amount.
Entered amount should fall within 1 - 40 mm.
(4) Touch [Lead Edge], [Rear Edge], or [Center] to specify the
desired image position.
(5) Touch [Size Registration] to display the Size Registration
Screen.
(6) Touch the desired number key to highlight it, using [Next] and
[Previous] as needed. Select the key with a name displayed to
overwrite the size and name registered for that key.
(7) Touch [Add] to display the Input Custom Size Name Screen.
Touching [Delete] will display a popup menu to confirm the data
deletion. Touch [Yes] to delete the data registered for that key.
(8) Enter the desired name, then touch [OK] to return to the previous
screen.
(9) Touch [Close] to restore the Size Setting Screen.
(10) Touch [OK] to complete the setting and return to the Paper
Setting Screen.
Touching [Fix] will complete the setting and directly return to the
Print Screen.
3-26
Paper Information
bizhub PRO C6500P