Konica Minolta bizhub pro C6500P User Manual page 636

8
Note
The file cannot be accessed when the machine is operating. If an error
message is displayed, try again to save the file after the current machine
operation is completed.
Note
If the registration cannot be completed successfully, error messages will
be displayed as follows.
"Can't transfer data (The machine is busy)"
Try again to import the data after the machine operation in progress is
completed.
"The data cannot be recognized"
Confirm that the data is the machine setting file.
"Data size is too large"
Confirm that the data is the machine setting file.
Check if the file size exceeds 100,000 bytes.
"The data cannot be registered"
Check if inappropriate description is made in the machine setting file.
Check if the file entries are already over the limit.
To Edit the Machine Setting File
- Save the file as a text.
- Begin the file with a specified tag. (ex. #EKC_TAB)
- A line should be 300 bytes or less.
- The file size should be 100,000 bytes or less.
- The line that begins with "#" is a comment.
ex. Machine setting file of an account track data
8-26
Web Utilities Setting
bizhub PRO C6500P