Konica Minolta bizhub pro C6500P User Manual page 368

3
4
Specify A3 then press [Start] on the control panel.
A sample pattern (No. 16) will be output.
5
If output sheets are misaligned, touch [ADJUSTMENT] tab.
The Paper Width Adjustment Screen will be restored.
6
Use the touch panel keypad to enter the desired adjustment value, then
touch [<<SET].
Available range: -20 (narrow) to +20 (wide), 1 step = 0.1 mm
7
Repeat steps 3 to 6 until the desired result is obtained.
8
Touch [Return] to restore the Adjustment Menu Screen.
3-46
Adjustment
bizhub PRO C6500P