Installation Procedure - Olivetti d-COLOR MF652 User Manual

3.2 Quick installation of the fax driver

Installation procedure

Install the fax driver on the PC by using the installer.
0 You need to have the administrator privileges to perform this task.
0 Use the DVD-ROM.
1
Connect a USB cable to the USB port of this machine.
% If a wizard screen appears to add new hardware, click
[Cancel].
2
Mount the DVD-ROM disk on the DVD-ROM drive of the PC.
% Ensure that the installer starts, then go to Step 3.
% If the installer does not start, open the printer driver folder on the DVD-ROM, double-click [Set-
up.exe], then go to Step 4.
% If the [User Account Control] screen appears, click [Continue] or [Yes].
3
Click [Printer Install].
4
Read the license agreement, then click [AGREE].
5
Select [Install printers/MFPs], then click [Next].
Printers being connected via USB ports are detected.
6
Select this machine, then click [Next].
7
Select the fax driver box, then click [Next].
8
Check the components to be installed, then click [Install].
9
Change the printer name or print a test page if necessary, then click [Finish].
The fax driver has been installed on the PC.
Settings
[Review]
[Rename Printer]
[Property]
[Print Setting]
[Print Test page]
d
Reference
Be sure to initialize the fax driver after you have installed it. For details, refer to page 3-6.
d-Color MF 752/652
Description
Displays the installed components for checking.
Changes this machine name if necessary.
Sets the optional operating environment of this machine. For details, refer
to page 3-6.
Changes the default print settings of this machine if necessary. For details,
refer to page 3-6.
Prints a test page to check the normal data transfer if necessary.
3
3-5