Quick Installation Of The Fax Driver; Installation Flow; Check The Operating System (Os) Version That Supports The Fax Driver; Installation Procedure - Olivetti d-COLOR MF652 User Manual

2
2.3

Quick installation of the fax driver

Installation flow

The following explains the system setup flow to enable PC-Fax TX from the PC.
1
Prepare the fax driver.
% Prepare the DVD-ROM disk.

% Check the operating system (OS) version that supports the fax driver.

Ensure that the operation requirements of the fax driver are satisfied by the PC where you install the fax
driver.
2
Install the fax driver on the PC.
% Install the fax driver on the PC using the installer.
Mount the DVD-ROM disk on the drive, and install the software by following the on-screen instructions.
% Carry out a test print.
Carry out a test print and verify that it is acceptable.
3
Preparation has finished.
Check the operating system (OS) version that supports the fax driver
For details on the PC's Operating System (OS) that supports the fax driver, refer to page 1-4.

Installation procedure

Install the fax driver on the PC by using the installer.
0 You need to have the administrator privileges to perform this task.
0 Use the DVD-ROM.
1
Mount the DVD-ROM disk on the DVD-ROM drive of the PC.
% Make sure that the installer starts, and then go to Step 2.
% If the installer does not start, open the printer driver folder on the DVD-ROM, double-click [Set-
up.exe], and then go to Step 3.
% If the [User Account Control] screen appears, click [Continue] or [Yes].
2
Click [Printer Install].
3
Read the license agreement, then click [AGREE].
4
Select [Install printers/MFPs], then click [Next].
Connected printers are detected.
% For Windows Vista/7/Server 2008/Server 2008 R2, you can select [Preference for IPv4] or [Prefer-
ence for IPv6]. The address has the preference when detected in both IPv4 and IPv6.
5
Select this machine, then click [Next].
% If this machine is not detected, restart it.
% You do not need to change the printing method from [Normal Printing] (Port 9100) unless otherwise
specified by the administrator.
% As a printing method, you can select [Normal Printing], [Internet Printing] (IPP), or [Secure Printing]
(IPPS).
% Among the connected printers, only the target model is automatically detected and displayed. If
multiple target models are displayed, check the IP addresses.
You can check the IP address of this machine in the screen that is displayed by tapping [Utility] -
[Device Information].
% If the connection to this machine cannot be recognized, it is not displayed in the list. In such a case,
select [Specify the Printer/MFP Except for the Above.(IP Address, Host Name...)], and manually
specify the IP address and host name of this machine.
6
Select the fax driver box, then click [Next].
2-6
Quick installation of the fax driver
d-Color MF 752/652
2.3