Installation Procedure - Olivetti d-COLOR MF652 User Manual

2.1 Preparation for Printing (Network Connection)

Installation procedure

Install the printer driver using the installer.
0 Administrator privileges are required to perform this task.
0 Use DVD-ROM to install the PCL/PS and the XPS driver on the PC.
0 The following explains the PCL/PS driver installation procedure. You can also install the XPS driver in
a similar way.
1
Insert the DVD-ROM into the DVD-ROM drive of the computer.
% Make sure that the installer starts, and then go to Step 2.
% If the installer does not start, open the printer driver folder on the DVD-ROM, double-click [Set-
up.exe], and then go to Step 3.
% If the [User Account Control] window appears, click [Continue] or [Yes].
2
Click [Printer Install].
3
Read the license agreement and click [AGREE].
4
Select [Install printers/MFPs] and click [Next].
Connected printers are detected.
% For Windows Vista/7/Server 2008/Server 2008 R2, you can select [Preference for IPv4] or [Prefer-
ence for IPv6]. The address has the preference when detected in both IPv4 and IPv6.
5
Select this machine, then click [Next].
% If this machine is not detected, restart this machine.
% You do not need to change the printing method from [Normal Printing] (Port 9100) unless otherwise
specified by the administrator.
% As a printing method, you can select [Normal Printing], [Internet Printing] (IPP), or [Secure Printing]
(IPPS).
% Among the connected printers, only the target model is automatically detected and displayed. If
multiple target models are displayed, check the IP addresses.
You can check the IP address of this machine in the screen that is displayed by tapping [Utility] -
[Device Information].
% If the connection to this machine cannot be recognized, it is not displayed in the list. If this is the
case, select [Specify the Printer/MFP Except for the Above. (IP Address, Host Name...)], and man-
ually specify the IP address and host name of this machine.
6
Select the check box of the printer driver you want to install, then click [Next].
% For features of each printer driver, refer to page 2-5.
7
Check the items to be installed, and click [Install].
8
If necessary, change the printer name or print a test page, and click [Finish].
This completes the installation process of the printer driver.
Settings
[Review]
[Rename Printer]
[Property]
[Print Setting]
[Print Test page]
d
Reference
When you finish installing the printer driver, configure the default settings of the printer driver. For details,
refer to page 2-8.
d-Color MF 752/652
Description
You can check the items that are installed.
If necessary, change the name of this machine.
You can configure the optional environment of this machine. For details,
refer to page 2-8.
If necessary, change the default print settings for this machine. For details,
refer to page 2-9.
If necessary, print a test page to check that printing process works correct-
ly.
2
2-7