Job Accounting > Setting an Account
Setting an Account
You can add, change and delete an account and set the restriction for each account.
Adding an Account
Up to 30 individual accounts can be added. The following entries are required.
Item
Account Name
Account ID
Restriction
1
Enter the account name (up to 32 characters).
Enter the account ID as many as eight digits (between 0 and 99999999).
This prohibits printing/scanning or restricts the number of sheets to load.
Refer to
Restricting the Use of the Machine on page
Display the screen.
1
Press the
[Status/System
2
Press the [▲] or [▼] key to select [Admin/Accounting], and press the [OK] key.
Status/Sys. Menu:
Counter
03
System
04
Admin/Accounting
05
Exit
NOTE
If the login user name entry screen appears during operations, log in by referring to
Administrator User Name and Password on page
The factory default login user name and login password are set as shown below.
Login User Name
*1
Admin
*1 Upper case and lower case letters are distinguished (case sensitive).
3
Press the [▲] or [▼] key to select [Job Account.Set.], and press the [OK] key.
4
Press the [▲] or [▼] key to select [Account. List], and press the [OK] key.
Job Account.Set.:
Total Accounting
03
04
Each Job Account
05
Account. List
Exit
Descriptions
Menu/Counter] key.
2-10.
Admin
8-5
8-7.
Login Password
*1