Kyocera TASKalfa 1801 Operation Manual page 195

System Menu and KYOCERA Client Tool > Default Settings on the PC (KYOCERA Client Tool)
Quick Scan Settings
No. Item
1 Output name
2 File format
3 File format settings (The item displayed changes depending on the value specified for File format.)
Separate files
Quality
PDF/A-1
Quality Stage
4 Preferences
5 OK/Cancel/Apply
1
4
5
Assign a document name to scanned images. When multiple images are saved in the same folder, a
three-digit incrementing number such as Scan_001, Scan_002... is appended to the end of the file
name. Up to 16 characters can be entered.
Specify the image file format.
Value: BMP, JPEG, PNG, TIFF, PDF, High-Compression PDF, CCITT Group 4, Image Mask, High-
Compression PDF, JBIG2, Mask + Image Mask
When this is selected, scanned data is separated into files page by page.
Set the image quality. Increasing the number results in higher quality and decreasing the number
results in lower quality. Higher quality will make the stored files larger.
Value: 1 to 100
NOTE
• This setting is valid for PDF, TIFF, and JPEG file formats.
• Non-numeric characters cannot be entered. If entered number is beyond range, the max/min value
will be restored.
Set PDF/A-1 format type.
Value: Off, PDF/A-1a, PDF/A-1b
Set the quality level for High Compression PDF.
Value: Standard, Compression Ratio Priority, Quality Priority
Displays the TWAIN settings screen. For detail, refer to
Clicking [OK] exits the Quick Scan Settings after applying the modified scan settings.
Clicking [Cancel] exits the Quick Scan Settings without applying the modified scan settings.
Clicking [Apply] applies the modified scan settings without exiting the Quick Scan Settings.
Description
TWAIN Settings on page
7-31
2
3
7-29.