Scan Destination Settings - Kyocera TASKalfa 1801 Operation Manual

System Menu and KYOCERA Client Tool > Default Settings on the PC (KYOCERA Client Tool)

Scan Destination Settings

Configure the Scan Destination settings on
IMPORTANT
To reflect settings in the machine, the [Reset] key on the operation panel of the machine needs to be pressed.
NOTE
Scan, Print Box, and device monitoring will be disabled while the [Scan] window is open.
Item
Destination number
Summary
Display name
Connection Settings
Original size
Original image
*2
Duplex
Original orientation
Sharpen
Scan color
*1 The optional Network Interface Kit is required.
*2 The optional document processor is required.
[Scan Destination] of the [Device] tab.
Select the destination number (1 to 30) to be registered. When a destination number is selected, the
settings registered in that number appear in the right-hand screen.
Shows a list of the settings of the selected program.
Set a name for the destination. Up to 16 characters can be entered. This name is displayed when you
select a destination on the machine operation panel.
Select the interface used to connect with the machine.
When connecting the machine to the PC on the network, configure the host name or IP address of the
*1
PC in use. Refer to When Connecting the Machine to the PC on the Network on page
Specify the size of originals being scanned.
Value: Auto, A3, A4, A5, A6, B4, B5 (JIS), B6, Folio, 216 × 340 mm, Ledger, Letter, Legal,
Statement, 11 × 15", Oficio II, 8K, 16K, Hagaki, Ofuku Hagaki, Custom
NOTE
Refer to Custom Orig.Size on page 7-12
Select image quality suited to the type of original.
Value:
Text + Photo Photo
Set duplex of original.
Value:
Off Binding left/right
Select the orientation of the original document top edge to scan correct direction.
Value:
Portrait Portrait
Top edge top Top edge left
Adjust the sharpness of the image.
Value: None, Low, Medium, High, Descreen (Blurs the outlines and reduces the sharpness.)
Select the color mode setting.
Value: Monochrome, Grayscale, Full color
Description
for selecting [Custom].
Text
Landscape
Top edge top
7-26
Binding top
Landscape
Top edge left
2-42.