How To Load Originals; Loading Originals In The Document Processor (Option) - Kyocera TASKalfa 1801 Operation Manual

Operation on the Machine > Loading Originals

Loading Originals in the Document Processor (Option)

The optional document processor automatically scans each sheet of multiple originals. Both sides of two-sided originals
are scanned.
Originals Supported by the Document Processor
The document processor supports the following types of originals.
Detail
Weight
Sizes
No. of sheets
Originals Not Supported by the Document Processor
Do not use the document processor for the following types of originals. Otherwise, the originals may be jammed or the
document processor may become dirty.
• Originals bound with clips or staples (Remove the clips or staples and straighten curls, wrinkles or creases before
loading. Failure to do so may cause the originals to jam.)
• Originals with adhesive tape or glue
• Originals with cut-out sections
• Curled original
• Originals with folds (Straighten the folds before loading. Failure to do so may cause the originals to jam.)
• Carbon paper
• Crumpled paper

How to Load Originals

IMPORTANT
• Before loading originals, be sure that there are no originals left on the original eject table. Originals left on
the original eject table may cause the new originals to jam.
• Do not make an impact on the document processor top cover, such as aligning the originals on the top
cover. It may cause an error in the document processor.
1-sided: 45 to 120 g/m²
2-sided: 50 to 120 g/m²
Maximum: Ledger/A3
Minimum: Statement-R/A5-R
Plain paper (50 to 80 g/m²), Colored paper, Recycled paper, High Quality: 50 sheets
(Mixed size originals: 30 sheets)
Thick paper (120 g/m²): 33 sheets
Art paper: 1 sheet
Document Processor
5-3