Kyocera TASKalfa 1801 Operation Manual page 140

Operation on the Machine > Scanning
Scan the Image by Selecting the Destination (Quick Scan)
Select the scan method and destination for each job by using KYOCERA Client Tool.
When Connecting the Machine to the PC via USB
Perform a scan by operating the computer (Host PC) connected to the machine via USB. If the shared folder in the
computer (Client PC) on the network is selected for the destination, an image can be saved on the computer that is not
connected to the machine via USB.
When Connecting the Machine to the PC on the Network
If the machine is connected to the PC on the network, an image can be saved in the PC on the network.
*1 The optional Network Interface Kit is required.
With Quick Scan, the following 3 types of scan are possible.
• Scan to PDF: Saves the scanned image in PDF format.
• Scan to E-mail: Attaches the scanned image to a new E-mail message.
• Scan to Folder: Saves the scanned image to a specified folder.
1
Perform a scan by using KYOCERA Client Tool.
(Refer to Scan the Image by Selecting the
Destination (Quick Scan) on page
USB
KYOCERA Client Tool
1
Perform a scan by using KYOCERA Client
Tool. (Refer to
Selecting the Destination (Quick Scan) on
page 5-40)
Network
Network
5-40)
Host PC
Network
*1
Scan the Image by
KYOCERA Client Tool
5-34
2
An image is saved in the folder
set by KYOCERA Client Tool.
Client PC
Network
2
An image is saved in the folder
set by KYOCERA Client Tool.
Network
Network