Saving Document To A Print Box; Start Printing - Kyocera TASKalfa 1801 Operation Manual

Printing from PC > Using Print Box

Saving Document to a Print Box

Use the procedure below to save a document in the Print Box created on the PC. Print Box can be selected from [Box
01] to [Box 30]. To use the other boxes or to change the default box name, configure the settings on KYOCERA Client
Tool. Refer to Default Settings on the PC (KYOCERA Client Tool) on page
In addition, a PIN code can be set for a Print Box. Since the PIN code must be entered when printing at the machine,
security is enhanced.
1
2
3
4
Start KYOCERA Client Tool on the Host PC.
Click [Start] button on the Windows and then select
and [KYOCERA Client Tool] to start KYOCERA Client Tool.
NOTE
In Windows 8, select [Search] in charms, [Apps], and then
Display the screen on your PC.
1
Click [File] and select [Print] in the application.
2
Select the machine from the "Name" menu and click [Properties].
3
Select the [Job] tab.
Configure the settings.
1
Select [Print Box] then select the Print Box where the print job should be stored from the
[Box 01] to [Box 30].
2
As necessary, set the job name for the print job.
NOTE
Note that the same job name is set and the job is overwritten if [Custom] and
existing file] are set.

Start printing.

Select [OK] to return to the "Print" screen and click [OK] to start storing.
7-22.
[All
4-12
Programs], [Kyocera], [Client
[KYOCERA Client Tool].
Tool]
[Replace