Ipv6 Lan Setup - Draytek Vigor2130 series User Manual

Password
Confirm Password
Server
Tunnel mode
Tunnel ID
4 4 . . 1 1 3 3 . . 2 2 I I P P v v 6 6 L L A A
This page defines the IPv6 connection types for LAN interface. Possible types contain
DHCPv6 Server and RADVD. Each type requires different parameter settings.
Available settings are explained as follows:
Item
LAN IPv6 Configuration
Vigor2130 Series User's Guide
from other ISP, such as http://www.sixxs.net/.
Type the password assigned with the user name.
Type the password again to make the confirmation.
Type the default server address, tic.sixxs.net.
Choose one of the tunnel modes
AYIYA – allows tunnels to be created even behind firewalls
and NAT's.
Heartbeat – sends a packet to the PoP (Point of Presence,
serving IPv6 in IPv4 tunnel), then enables the tunnel on the
PoP side.
Each account applied by the user from AICCU service
provider supports 2 or more services for IPv4 to IPv6/IPv6 to
IPv4 with different tunnel IDs. Simply type tunnel ID
characters obtained from AICCU service provider for IPv6
connection. For the default setting, simply use the word
"any".
For more details, please refer to
http://www.sixxs.net/tools/aiccu/。
N N S S e e t t u u p p
Description
IPv6 Address - Type static IPv6 address for LAN.
237