Ports Priority - Draytek Vigor2130 series User Manual

Click
M o v i n g
M o v i n g
Click
D e l e t i n
D e l e t i n
To delete a QCE in the list, simply click
4 . 6 . 5 P o r t s P r
4 . 6 . 5 P o r t s P r
This page allows you to configure QoS settings for each port. The classification is controlled
by a QCL (Quality Control List) that is assigned to each port. A QCL consists of an ordered
list of up to 12 QCEs (Quality Control Entry). Each QCE can be used to classify certain
frames to a specific QoS class. This classification can be based on parameters such as VLAN
ID, UDP/TCP port, IPv4/IPv6 DSCP or Tag Priority. Frames not matching any of the QCEs
are classified to the default QoS class for the port.
Available settings are explained as follows:
Item
Port
Default Class
QCL (QoS Control List )
Vigor2130 Series User's Guide
to modify the settings of an existing QCE on this page.
U p / D o w n a Q C E
U p / D o w n a Q C E
and to move a QCE up and down.
g a Q C E
g a Q C E
i o r i t y
i o r i t y
Description
Indicate the interface for the physical port, WAN port, LAN
port and Wireless Port.
Use the drop down list to choose the priority for each port.
Use the drop down list to choose the QCL number defined
in QoS Control List for the port.
of that one. It will be removed immediately.
155