Ipv6 Lan Setup - Draytek Vigor 2130 Series User Manual

3 . 9 . 2 I P v 6 L A N S
3 . 9 . 2 I P v 6 L A N S
This page defines the IPv6 connection types for LAN interface. Possible types contain
DHCPv6 and RADVD. Each type requires different parameter settings.
IPv6 Address
IPv6 Link_local Address
Enable Autoconfiguration
Configuration Type
e t u p
e t u p
Type static IPv6 address for LAN.
It is used for communicating with neighbouring nodes on
the same link. It is defined by the address prefix fe80::/10.
You don't need to setup Link-Local address manually for it
is generated automatically according to your MAC Address.
Check this box to enable the auto-configuration function for
IPv6 connection.
Vigor2130 provides 2 daemons for LAN side IPv6 address
configuration. One is RADVD(stateless) and the other is
DHCPv6 Server (Stateful).
DHCPv6 Server- DHCPv6 Server could assign IPv6
address to PC according to the Start/End IPv6 address
configuration.
IPv6 Start Address/IPv6 End Address- Type the start and
end address for IPv6 server.
RADVD - The router advertisement daemon (radvd) sends
Router Advertisement messages, specified by RFC 2461, to
a local Ethernet LAN periodically and when requested by a
node sending a Router Solicitation message. These
messages are required for IPv6 stateless auto-configuration.
124
Vigor2130 Series User's Guide