Draytek Vigor2130 series User Manual page 78

be applied to each connection type.
Below shows the configuration page for each connection type:
S t a t i c
S t a t i c
For static IP mode, you usually receive a fixed public IP address or a public subnet, namely
multiple public IP addresses from your DSL or Cable ISP service providers. In most cases, a
Cable service provider will offer a fixed public IP, while a DSL service provider will offer a
public subnet. If you have a public subnet, you could assign an IP address or many IP address
to the WAN interface.
To use Static as the accessing protocol of the internet, please choose Static mode from
Connection Type drop down menu. The following web page will be shown.
70
Vigor2130 Series User's Guide