Draytek Vigor2130 series User Manual page 81

Available settings are explained as follows:
Item
DHCP Settings
WAN Connection
Detection
Clone MAC Address
Mail/SMS Alert
After finishing all the settings here, please click OK to activate them.
Vigor2130 Series User's Guide
Description
Router Name -Type in a name for the router. It must be the
same as the name used in Syslog.
Domain Name -Type the domain name (e.g., draytek) to fit
the request of some ISPs.
MTU Size -It means Max Transmit Unit for packet. The
default setting will be specified by the system
automatically. Therefore, keep this field in blank.
Mode -Such function allows you to verify whether network
connection is alive or not through ARP Detect or Ping
Detect. Choose ARP Detect or Ping Detect for the system
to execute for WAN detection.
Ping IP-If you choose Ping Detect as detection mode, you
have to type IP address in this field for pinging.
Enable – Enable the feature.
It is available when the box of Enable is checked. Click
Clone MAC Address. The result will be displayed in the
field of MAC Address.
Alert Types – Specify the type of the alert (mail, SMS, or
Mail and SMS) that Vigor system will use to send a
message to the user.
Event types – Specify the event when the system must send
a notification to the user by mail and/or SMS.
73