Draytek Vigor2130 series User Manual page 99

WAN Connection
Detection
Mail/SMS Alert
Reset USB
Default
5 6 K B a
5 6 K B a
When the WAN connection is broken, router will try to keep the connection with 56K mode if
it is enabled. After WAN connection is recovered, router will disconnect the 56K connection
automatically.
Available settings are explained as follows:
Vigor2130 Series User's Guide
question, please contact to your ISP.
PPP Username - Type the PPP username (optional).
PPP Password -Type the PPP password (optional).
Mode -Such function allows you to verify whether network
connection is alive or not through ARP Detect or Ping
Detect. Choose ARP Detect or Ping Detect for the system
to execute for WAN detection.
Ping IP-If you choose Ping Detect as detection mode, you
have to type IP address in this field for pinging.
Alert Types – Specify the type of the alert (mail, SMS, or
Mail and SMS) that Vigor system will use to send a
message to the user.
Event types – Specify the event when the system must send
a notification to the user by mail and/or SMS.
Click it to reset the USB device.
Click it to retrieve the factory settings for current page.
c k u p
c k u p
91