Led Board / Microphone Assembly / Speaker Assembly - Toshiba Portege R300 Maintenance Manual

4.18 LED board / Microphone assembly / Speaker assembly

4.18 LED board / Microphone assembly / Speaker assembly

Removing the LED board
To remove the Front panel, follow the steps below and refer to Figure 4-28.
1. Remove the LED board fixed to the Front panel with double-sided tapes.
Removing the Microphone assembly
To remove the microphone assembly, follow the steps below and refer to Figure 4-28.
1. Lift up/down the hook and remove the microphone holder from the Front panel.
2. Remove the microphone from the Front panel.
Removing the Speaker assembly
To remove the speaker assembly, follow the steps below and refer to Figure 4-28.
1. Take off the speaker cable from the cable guide on the Front panel.
2. Remove the speaker assembly from the Front panel.
3. Separate the speaker cover and the speaker.
Speaker
Speaker cover
Figure 4-28 Removing the LED board / Microphone / Speaker
Installing the LED board
To install the LED board, follow the steps below and refer to Figure 4-28.
1. Stick the double-sided tape on the LED board.
2. Stick the LED board to the Front panel.
PORTÉGÉ R300 Maintenance Manual (960-591)
Speaker cable
4 Replacement Procedures
LED board
Microphone
Microphone holder
[CONFIDENTIAL] 4-37