Punch Horizontal Position Adjustment - Konica Minolta BIZHUB C203 User Manual
Hide thumbs
Also See for BIZHUB C203:
- Service manual (1028 pages) ,
- Copy operations (604 pages) ,
- User manual (494 pages)
Table of Contents
Advertisement
Utility mode
11.8.3
Punch Horizontal Position Adjustment
When printing with a Punch setting, the angle of punched holes along the side of the paper can be adjusted.
Note
[Punch Horizontal Position Adjustment] does not appear if optional finisher and punch kit are not
installed.
!
Detail
For details on the Punch settings, refer to
0
Before making any adjustments, use a Punch setting to print a sample copy. Perform the adjustment
while checking the sample that was created.
1
Display the Administrator Settings screen.
–
For details on displaying the Administrator Settings screen, refer to
Settings screen" on page
2
Touch [1 System Settings].
The System Settings screen appears.
3
Touch [7 Expert Adjustment].
The Expert Adjustment screen appears.
4
Touch [3 Finisher Adjustment].
The Finisher Adjustment screen appears.
5
Touch [3 Punch Horizontal Position Adjustment].
The Punch Horizontal Position Adjustment screen appears.
6
Touch the button for the paper type to be adjusted.
Check the horizontal position of the punched holes.
–
To increase width A, touch [+] to increase the adjustment.
C353/C253/C203
"Punching holes in copies (Punch settings)" on page
11-34.
"Displaying the Administrator
11
2-66.
11-52
Advertisement
Table of Contents
Troubleshooting
