Resetting Nvram - Tektronix PHASER 780 Service Quick Reference Manual

Resetting NVRAM

Resetting NVRAM returns all the image processor's NVRAM-stored parameters
to their factory defaults except the print counts and the Adobe firmware serial
number.
Caution
Resetting NVRAM will also reset the network card's NVRAM.
If possible, copy down all network parameters or print the
Configuration Page.
To reset the image processor to its factory default values, follow this procedure:
1. Turn on the printer
2.
When the row of "
and release button 1 and then press and release button 4.
3. When the front panel displays "Password?", press and release button 1,
then press and release button 3. The display responds with the message
"Resetting NVRAM." Following NVRAM reset, the print powers up
normally.
*
", begins to be displayed on the front panel, press
Service Guide 79