Table of Contents
Advertisement
Page
8
It is a good practice to have the instrument near the AC outlet and the power cord plug in a position so
that it can readily be disconnected in an emergency.
Before connecting cords, make sure
that the power to this product
and other devices is turned OFF.
The product should be located so that its location or position does not interfere with its proper ventilation.
Keep the instrument away from electrical motors, neon signs,
fluorescent light fixture, and other sources of electrical
noises.
Care should be taken so that objects do not fall and liquids are not spilled
into the enclosure through openings.
The product shall not be exposed to dripping or splashing. No objects filled
with liquids, such as vases, shall be placed on the product.
When connecting the AC power cord
and other cords, take care not to get
them tangled.
Take care not to drop the product.
Please note that the product is heavy and must be handled by more than
one person. Dropping the product may result in breakdown.
Do not lean against the product.
Doing so may cause the product to move unexpectedly, resulting in
injury.
Do not stand on the product or exert excessive force.
Doing so may cause the product to become deformed or fall over, resulting in
breakdown or injury.
Do not wipe the product with benzene or thinner.
Doing so may result in discoloration or deformation of the product.
When cleaning the product, put a soft cloth in lukewarm water, squeeze it well, then
wipe the product.
Failure to do so may cause breakdown of this
OFF
product and other devices.
Failure to do so may damage them, resulting in
fire, electric shock or short-circuit.
Advertisement
Table of Contents
