Kbd Settings Button Assign (Portamento, Panel Lock) - Kawai CP 1 Owner's Manual

Concert performer

Table of Contents

KBD SETTINGS BUTTON ASSIGN (Portamento, Panel Lock)

You can assign RIGHT3 Portamento or Panel Lock to the KBD SETTINGS button.

Portamento for the RIGHT3 Part

The RIGHT3 Part is monophonic (only plays one note at a time) regardless of which sound is assigned to it. You can use

Portamento on this Part. Portamento is a gradual slide in pitch from one note to the next, and is useful for adding very

expressive qualities to many instruments. You can adjust the Portamento Time, which determines how quickly the pitch

will slide from one note to the next.

Panel Lock

Locks all buttons on the panel to prevent them from being tampered with or pressed accidentally while you are playing.

When the KBD Settings Button is turned On the panel buttons will be locked. Turn the KBD Settings button Off to unlock

the panel buttons.

To assign Portamento or Panel Lock:

Step 1

Press and hold the KBD SETTINGS button.

The KBD SETTINGS screen will be displayed.

Step 2

Touch KBD SETTINGS BUTTON and use the dial to assign a function.

Step 3

Press the KBD SETTINGS button to exit.

Step 4

Press the KBD SETTINGS button.

The LED will light and the function assigned to the button will be activated. If Portamento is assigned the word

"BUTTON" will be displayed in the upper left on the main screen to indicate that Portamento is active. If Panel

Lock is assigned, the words "PANEL LOCKED !" will appear at the top of the screen, and the CP will not respond

to button pushes until the panel is unlocked.

Step 5

Press the KBD SETTINGS button.

The LED will turn off and the function will be deactivated. The word "BUTTON" will disappear from the main screen

and the Portamento or Panel Lock function will be deactivated.

Step 6

When Portamento is selected, you can adjust the Portamento time on the edit menu.

Touch the EDIT button to go to the Edit menu.

If the LEFT and CENTER PEDAL OVERRIDE and KBD SETTINGS BUTTON are all set to None, the LED will not light

when you press the KBD SETTINGS button.

Page

Table of Contents