Style Effect - Kawai CP 1 Owner's Manual

Step 5
Touch the part buttons at the bottom of the screen to mute/un-mute each Section
Step 6
If you would like to save your edits, touch the SAVE TO PRESET button in the top right corner.
The saved contents will be written to the PRESET STYLE. If you don't save your edits, they will be lost when you
turn the power OFF.
Step 7
Touch the MORE button to go to the Advanced Style Edit screen.
Step 8
Press the EXIT button to leave the Easy Style Edit screen.
Touching the SAVE button will save all Styles at one time. You cannot save styles individually.
For Intimate Styles the ACC 3/4 Sections are not used and cannot be edited.
For Solo Piano Styles the Drum, Bass, and ACC 3/4 Sections are not used and cannot be edited.
Resetting the Style
The CP always remembers the original Preset Style settings. If you wish to restore those factory settings before
saving your edits, simply touch the RESET button in the Conductor.
If you would like to revert all Styles back to their original factory settings, after you have pressed the SAVE button, use
reset Conductor on the Soft Reset screen. See the section titled "Soft Reset" on page 117.
Note:
Easy Edit doesn't allow you to edit the Intro, Ending and Fill-ins. However, muting a Section in the Style will result in
automatic muting of the same Section in the Intro, Ending and Fill-ins. If you mute a certain Section, you need to consider
what effect it will have on the overall Style.

Style Effect

The Style Effect screen allows a defined effect to be applied to each Section of the style.
Step 1
Touch the STYLE EFFECT icon.
The LCD screen will display the Style Effect screen.
Step 2
Touch the screen and use the Dial to select the style effect and effect settings.
Touch the part buttons at the bottom of the screen to turn the effect on/off for each Section.
EFFECT TYPE : Selects the type of effect to be
applied to the style.
BACK : Back to the EASY STYLE EDIT settings.
PART : Turn the select effect on or off for each Section.
STYLE SETTINGS: Adjust the selected effect's
settings.
Page
77
5