Adding An Effect - Kawai CP 1 Owner's Manual

Page
28
Step 4
Touch the buttons above each slider to turn the Chorus effect on or off.
Step 5
Touch the slider/Part that you wish to adjust.
Step 6
Use the Dial or touch and drag the slider to adjust the value.
Step 7
Press the EXIT button to leave the Chorus settings screen.
3

Adding an Effect

Step 1
Press the EFFECTS button.
Step 2
Touch the EFFECTS EDIT button.
The EFFECTS settings screen will be displayed.
Step 3
Use the dial to select the Effect type.
You can select from four chorus types when in the Chorus Settings menu. There is a fifth chorus type which is assigned
as an Effect from the Effect Settings menu. In this way, you can actually have two chorus effects active if so desired.
The EFFECT/CHORUS screen will be displayed.
EFFECT EDIT : Show the Effect Edit screen.
CHORUS EDIT : Show the Chorus Edit screen.
PART BUTTONS : Selects the part to adjust.