Kawai CP 1 Owner's Manual page 56

Page
56
Copy
The Copy function allows you to copy a section or all of the data on a track to another location.
The destination may be on the same track, or it can be on another track.
TO TRACK : Selects the destination track. Use
the Dial to select the track number 1-16,
Tempo, or Chord.
BAR : Selects the bar in the destination track
where the copied data will be placed.
4
Delete
Delete completely erases and removes the bars that you specify.
TRACK : Selects the track to be deleted. Use the
Dial to choose 1-16, Tempo, Chord or All.
START BAR : Selects the first bar that has the
data you want to delete. Use the Dial to
change bars.
END BAR : Selects the last bar that contains
the data that you want to delete. Use the
Dial to change bars.
The destination of the copied data must either be:
1) A location that already has data in it.
2) The first blank bar after the end of a track (Bar 1 if the destination track is empty).
For example, if a track only has 10 bars in it, you cannot copy data onto bar 20. You can, however, copy data to bars 1
through 11.
Copied data replaces any current data that may be at the destination.
BACK : Returns you to the Advanced Recorder menu.
UNDO : Undoes the copying. This option is not always available.
EXEC : Proceed with copying.
BACK : Returns you to the Advanced Recorder menu.
UNDO : Undoes the copying. This option is not always available.
EXEC : Proceed with copying.
FROM TRACK : Selects the track to be copied.
Use the Dial to select the track numbers
1-16, Tempo, or Chord.
START BAR : Selects the bar where the data
that you are copying starts. Use the Dial to
change the bar number.
END BAR : Selects the bar where the data
that you are copying ends. Use the Dial to
change the bar number.