Mixer - Kawai CP 1 Owner's Manual

Page
46

Mixer

On the Mixer screen, you can change the following settings for each of the 16 tracks: Reverb level, Chorus level,
Effect on/off, Panning, Track mute, Volume level.
To use the Mixer:
Step 1
Touch the number of the track or the TRACK buttons to select the track you wish to make changes to.
4
Step 2
Touch the buttons along the side of the screen to choose the setting that you wish to change.
Step 3
Use the Dial to change the value.
Step 4
Alternatively, touch the setting for the track that you wish to change.
A zoomed version of the selected area will be shown, allowing adjustments to be made more easily.
Step 5
At this point, you can start recording or go to another menu to continue setting up.
Note: "Saving" here only means any changes you made on the Mixer screen were saved as part of the song.
You can make changes on the Mixer screen at any time except while the CP is busy recording. The Mixer screen is
accessible from the Advanced Recorder menu, Track Settings screen and Real-time Rec screen.
You can save any changes you have made to the settings on the Mixer screen at any bar or beat in your song. Simply
play back the song or press the FWD/RWD buttons until you reach the exact bar and beat where you want to make
changes to the Mixer settings and stop the song. Make any changes on the Mixer screen, then touch the SAVE button.
You can do this as many times and in as many places within your song as you wish.
MENU : Returns you to the Advanced Recorder menu.
TRACK : Selects the track that you wish to edit.
TRACK SETTINGS : Shows the Track Settings menu.
LOOP : Turns Loop ON/OFF.
SAVE : Saves the Mixer settings as part of the song.
BACK : Returns you to the Advanced Recorder menu.