User Conductor Styles - Kawai CP 1 Owner's Manual

Step 7
Press the EXIT button to exit the Advanced Style Edit screen.
Important Note:
If you are using a User Style as the Source Style of your User Conductor, that User Style must always be kept at
the same location in the CP, or else the User Conductor will not be able to locate it.
Resetting the Style
You can restore the original Style settings by touching the RESET button on either the Easy or Advanced Style
Edit screens. This will completely clear the changes made to the Styles except any data already saved as a User
Conductor Style. You can also instantly discard the current changes by pressing the EXIT button to leave the
Advanced Edit screen.

User Conductor Styles

Step 1
Touch the USER button.
If there are any User Conductor Styles available, they will be displayed.
Step 2
Touch the screen to select your desired User Conductor Style.
PAGE : Show User Conductor Styles on the other pages.
DELETE : Deletes the selected User Conductor Style.
Touch the screen to select your desired User
Conductor Style.
Page
79
5