Kawai CP 1 Owner's Manual page 57

Insert
The Insert function duplicates data from specified bars and copies it to a certain location. However, the current
data at the destination is not erased, but instead is pushed back to make room for the copied data.
TO TRACK : Selects the destination track where
you want this data inserted. Choose from
1-16, Tempo, Chord or All.
BAR : Selects the bar in the destination track
where you want this data inserted.
If you just wish to insert empty bars into a track, select INSERT BAR, and a sub-menu will be displayed. You can insert
empty bars into a track between bars that have data, or at the first blank bar at the end of the track.
TO TRACK : Selects the track where the empty
bars are going to be inserted. Choose 1-16,
Tempo, Chord or All.
BAR : Selects the location in the destination
track where you want the empty bars
inserted.
Use the Dial to choose the location.
Erase
Erases data in the bars that you specify, and leaves them as empty bars.
TRACK : Selects the track that has the bars
you want to erase. Choose 1-16, Tempo
or Chord.
START BAR : Selects the first bar to be erased.
Use the Dial to change the bar.
END BAR : Selects the last bar to be erased.
Use the Dial to change the bar.
BACK : Returns you to the Advanced Recorder menu.
UNDO : Undoes the insert. This option is not always available.
INSERT BAR : Tales you to the Insert Bar menu.
EXEC : Proceed with the insert.
BACK : Returns you to the Advanced Recorder menu.
UNDO : Undoes the insert. This option is not always available.
EXEC : Proceed with the insert.
BACK : Returns you to the Advanced Recorder menu.
UNDO : Undoes the erase. This option is not always available.
EXEC : Proceed with the erase..
FROM TRACK : Selects the track that contains
the data you wish to duplicate. Choose from
1-16, Tempo, Chord or All.
START BAR : Selects the first bar that has the
data you want to duplicate.
END BAR : Selects the last bar that has the data
you want to duplicate.
BAR : Selects the number of empty bars you
wish to insert. Use the Dial to change the
value.
B/M : Selects the time signature for the bars
that are going to be inserted. Use the Dial
to change the value.
Page
57
4