Pedals; Front Terminals; Rear Terminals - Kawai CP 1 Owner's Manual

Page
12

Pedals

1
J J

Front Terminals

Rear Terminals

CP1
P EXP Pedal
This jack is used to connect an optional expression pedal.
Q Video Out
This jack is used to connect the CP to a TV set or external
monitor display.
R Line Out Jacks
These jacks are used to provide stereo output of the
CP's sound to amplifiers, tape recorders or similar
equipment. The audio signal coming through the LINE
IN jacks is also routed to these jacks.
S Line In Jacks
These jacks are used to connect stereo outputs from
other audio equipment or electronic instruments to the
CP's speakers. The audio signal coming through these
jacks bypasses the CP's volume control.
K K L L
M M N N O O
P Q R
CP2
J Soft Pedal
Depressing this pedal softens the sound and reduces its volume.
This pedal can also be assigned to control other functions.
(See page 104)
K Sostenuto Pedal
Depressing this pedal after playing the keyboard and before
releasing the keys sustains the sound of only the keys just
played. This pedal can also be assigned to control other
functions. (See page 104)
L Damper Pedal
Sustains the sound after lifting your hands from the keyboard.
The damper pedal is capable of responding to half pedaling.
M Headphone Jacks
These jacks are used to connect up to two headphones to the
CP piano.
N Mic In Volume
This knob adjusts volume level of the microphone input.
O Microphone Jack
This jack is used to connect a microphone or other comparable
mic-level sound
U
S T
T Line In Volume
This knob is used to adjust the volume level of audio
signal.
U FIXED Jacks
These jacks are used to provide stereo output of the
CP's sound to professional amplification and mixing
equipment using XLR terminals
V MIDI Jacks
These jacks are used to connect external MIDI devices
to the CP.
W USB Jack
This jack is used to connect a personal computer to
the CP.
X Receptacle for Pedal Cable (CP1 only)
This jack is used to connect the cable from the CP1's
pedal lyre.
V W X