Right3 Settings - Kawai CP 1 Owner's Manual

6) RIGHT3 Settings

This configures the special settings for the RIGHT3 part. Changing these settings will also change these settings
in the KBD SETTINGS menu.
RIGHT3 Type
The RIGHT3 Type setting determines whether or not the RIGHT3 part should be polyphonic or monophonic.
There are two options:
Normal
Solo
Solo Priority
When the RIGHT3 type is set to Solo (monophonic) type, the Solo Priority setting allows you to select which note will
be played by the RIGHT3 part when more than one key is played at a time.
There are three options:
Top Note
Bottom Note
Last Note
Solo Trigger Mode
The trigger mode determines whether or not the note played by the RIGHT3 part will be re-triggered when certain notes
are released. There are two options:
Retrigger
No Retrigger
Portamento Time
Portamento Time This setting determines how long it takes for the pitch to slide up or down from one note to the next
Solo Mode
When using RIGHT3 Part, you can select between two Solo Modes.
Layer
Split
Any changes to these settings will also change the settings in the KBD SETTINGS menu.
Portamento time can also be set from the KBD SETTINGS button menu. Press and hold the KBD SETTINGS button,
then select KBD SETTINGS BUTTON ASSIGN from the menu. Select SOLO PORTAMENTO as the setting, then touch
edit to set the portamento time.
RIGHT3 TYPE : Selects the playing mode for
the RIGHT3 part.
SOLO PRIORITY* : Selects the note priority.
SOLO TRIGGER MODE* : Selects the Trigger
PORTAMENTO TIME* : Adjusts Portamento
The RIGHT3 part is polyphonic (i.e. multiple notes can be played at the same time).
The RIGHT3 part is monophonic (i.e. only one note can be played at the same time).
The RIGHT3 part plays only the highest note among the notes played at one time.
The RIGHT3 part plays only the lowest note among the notes played at one time.
The RIGHT3 part plays only the last key played among the notes played at one time.
When the note played by the RIGHT3 part is released, depending on the Solo priority setting the
next available priority note will be played automatically by the Solo part. For example: when the
Solo Priority is set to Top Note and you release the highest note the next note below the note you
released becomes the highest note and will now be played by the RIGHT3 part.
When the note played by the RIGHT3 part is released, The RIGHT3 part will not automatically play
the next available priority note.
The RIGHT3 part will only play a new note based upon the Solo priority setting. For example, when
the Solo priority is set to Top Note and you release the highest note the RIGHT3 part will only play
a note when you press a key that is higher than the currently held notes.
when portamento is active.
The sound assigned to the RIGHT3 part will be layered on top of the RIGHT1 and RIGHT2 Parts.
Only the sound assigned to the RIGHT3 part will be heard when you play above a specified key
(split point) on the keyboard. The default split point is C6 but you can freely change the split point
to any key on the keyboard. When the RIGHT3 Part is activated in Split mode the split point will be
displayed in the LCD screen using the same 88 note diagram that is used to display the LEFT/SPLIT
split point. The keys assigned to the RIGHT3 Part above the specified split point will be shown with
a black bar above them. There is no arrow to indicate the RIGHT3 split point because the split point
for the RIGHT3 Part cannot be changed on the main screen.
mode.
time.
MENU : Takes you to the Settings menu.
SOLO MODE* : Selects the SOLO mode
settings.
* Settings are only effective when RIGHT3 TYPE
is set to SOLO.
Page
107
7