Sound - Panasonic DMR-ES30VEB Operating Instructions Manual

Hide thumbs Also See for DMR-ES30VEB:
Table of Contents

Advertisement

FUNCTIONS Selection Menu
FUNCTIONS
To Others
SETUP
Dynamic Range Compression
Bilingual Audio Selection
Digital Audio Output
Tuning
Disc
Picture

Sound

Display
Connection
SELECT
TAB
Others
SETUP
Digital Audio Output
PCM Down Conversion
Dolby Digital
Tuning
DTS
Disc
MPEG
Picture
Dolby Digital
Sound
Display
Bitstream
Connection
PCM
Others
SELECT
ENTER
RETURN
SETUP
Sound
Dynamic Range
Off
Compression
M1
(only Dolby Digital)
Bilingual
Audio Selection
-R
-RW V +R
( )
RETURN
Digital Audio Output
Off
Bitstream
Bitstream
PCM
PCM Down Conversion
Ext Link 1
Dolby Digital
DTS
MPEG
Setting
[ON] [Off]
DVD-V
On: The level of quiet sections is increased and the level of loud sections is
decreased. The sound is still clearly audible when the volume is decreased.
[M 1] [M 2]
If you want to record programmes on Discs that were broadcast in dual channel tone, you
can choose between the original language [M 1] or another available language [M 2].
If you are copying from an external source or a tape position to Discs, select the sound
track on the other unit.
PCM Down Conversion
Dolby Digital
DTS
MPEG
[ON] [Off]
Select the audio output mode at a scanning frequency of 96 kHz or 88.2 kHz. Despite this
setting, signals are converted to 48 kHz or 44.1 kHz if they have a scanning frequency of
more than 96 kHz or 88.2 kHz or a disc is copy-protected.
ON: The connected unit cannot process signals with a scan frequency of 96 kHz or
88.2 kHz. Signals are converted to 48 kHz or 44.1 kHz.
Off: The connected unit can process signals with a scan frequeny of 96 kHz or 88.2 kHz.
Signals are output as 96 kHz or 88.2 kHz.
[Bitstream] [PCM]
Bitstream: The connected unit can decode the corresponding signal.
PCM: If the connected unit cannot decode the corresponding signal, the setting must be
switched to [PCM]. Otherwise, strong noise can cause damage to hearing or
loudspeakers.
Perform settings based on your audio system.
ENTER
Option
Select the appropriate setting if an external unit is connected
to the DIGITAL AUDIO OUT of the DVD recorder.
DVD
ENTER
75

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents