Table of Contents
Advertisement
Multi-channel TV Sound (Analog)
[-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW]
Select whether to record the main or secondary audio program
(SAP) when recording to these discs. (You cannot select the
audio type on the unit when recording audio from an external
device. Select it on the external device.)
Perform steps 1−3 of "Accessing the Setup Menu" (
, to select "Audio", then
, to select "Multi-channel TV
Sound (Analog)", then
, to select "Main" or
"Secondary Audio Program
(SAP)", then
Multi-channel TV Sound (Digital)
Select the preferred digital broadcast language.
Perform steps 1−3 of "Accessing the Setup Menu" (
, to select "Audio", then
, to select "Multi-channel TV
Sound (Digital)", then
, to select "English", "French"
or "Spanish", then
Digital Audio Output
Change the settings when you have connected equipment
through the unit's DIGITAL AUDIO OUT terminal (
Perform steps 1−3 of "Accessing the Setup Menu" (
, to select "Audio", then
, to select "Digital Audio
Output", then
55).
OK
OK
55).
OK
OK
72).
55).
OK
PCM Down Conversion
Select how to output audio with a sampling frequency of
96 kHz or 88.2 kHz. Signals are converted to 48 kHz or 44.1 kHz
despite the settings if the signals have a sampling frequency of
over 96 kHz or 88.2 kHz, or the disc has copy protection.
After selecting "Digital Audio Output" (
, to select "PCM Down
Conversion", then
, to select "On" or "Off", then
OK
[On]
Signals are converted to 48 kHz or 44.1 kHz.
(Choose when the connected equipment cannot
process signals with sampling frequency of 96 kHz or
88.2 kHz.)
[Off]
Signals are output as 96 kHz or 88.2 kHz. (Choose
when the connected equipment can process signals
with sampling frequency of 96 kHz or 88.2 kHz.)
Dolby Digital
Choose whether to output by "Bitstream", which processes
Dolby Digital signals on other connected equipment, or to
convert the signals to "PCM" (2ch) on the unit before output.
After selecting "Digital Audio Output" (
, to select "Dolby Digital",
then
OK
, to select "Bitstream" or
"PCM", then
[Bitstream] When you have connected the unit to equipment
displaying the Dolby Digital logo.
[PCM]
When you have connected the unit to equipment
that doesn't have Dolby Digital logo.
Incorrect settings can cause noise to be output which can
be harmful to your ears and speakers, and audio will not be
recorded properly on media such as mini discs.
left, step 5).
OK
left, step 5).
OK
61
RQT9056
Advertisement
Table of Contents
