Picture Menu; Sound Menu - Panasonic LQ-MD800 Operating Instructions Manual

Prelimina

Picture menu

MODE
To select the picture mode during play
Normal: Default setting
Soft: Soft picture with fewer video artifact
Fine: Details are Fine mode
Cinema: Mellows movie, enhances detail in dark scenes.
User: You can make further adjustments next parameter.
･Page 1/2 of "Detail picture adjustment "
( "User " ⇒ [] ⇒ [▼] ⇒ [ENTER] )
Contrast: Increases the contrast between light and dark parts of the picture (-7 to +7).
Brightness: Brightens the picture (0 to +15).
Sharpness: Adjust the sharpness of the edges of the horizontal line (-6 to +6).
Color: Adjust the shade of the picture's color (-7 to +7).
(Press [ENTER] to enter the setting.)
･Page 2/2 of "Detail picture adjustment "
( "User " ⇒ [] ⇒ [▼] ⇒ [ENTER] ⇒ [▲] )
Gamma: Increases the brightness of the center ranges to improve detail and contrast in dark scenes (0 to +5).
3D NR: Reduces overall noise (0 to +4).
Block NR: Smoother block noise (0 to +3).
Mosquito NR: Reduces the smudging that appears around contrasting sections of the picture (0 to +3).
(Press [ENTER] to enter the setting.)
DNR
When any item other than "User" is select.
You can turn the recommended setting for 3D NR, block NR, and mosquito NR on and off.
ON OFF
Progressive
This menu is displayed only when setting both
･Progressive (NTSC)" to "ON" and "TV System" to "NTSC" in "Connection" Menu.
ON: Enables progressive output
OFF: Disables progressive output
Transfer
(When progressive output is ON)
Select the method of conversion for progressive output to suit the type of material being played. (page 59)
Auto1: For film material
Auto2: For video material(the same as Auto1, but able to convert 30 frames per second progressive video)
Video: For video material

Sound menu

Monitor
This is used to select the audio signals output to the monitor channel.
MIX CH1 CH2
Using the FUNCTION menus (continued)