Yamaha VK540EF Service Manual page 199

Engine stop switch coupler
1
Route the engine stop switch
lead backward the handlebar.
Thumb warmer coupler
2
Clamp
3
Route the throttle cable front-
4
ward the handlebar.
Fuel tank
5
Grip warmer connector
6
Brake cable
7
Clamp
8
Do not fasten the throttle cable
and brake cable.
Headlight switch coupler
9
Route the headlight switch lead
backward the handlebar.
Tail / brake light switch coupler
10
Route the tail / brake light switch
lead backward the handlebar.
Fasten the wire harness and
11
throttle cable with a clamp under
the handlebar cover bracket. Do
not fasten the brake cable.
Grip warmer switch lead
12
Starter cable
13
Intake silencer
14
T.O.R.S. lead
15
Secondary shaft (jackshaft)
16
Oil pump cable
17
Engine
18
Oil tank breather hose
19
Route the oil tank breather hose
over left and right side of the oil
tank.
Face the open part under than
20
the wire harness coupler.
Wire harness coupler
21
Clamp to open part.
22
80 X 100 mm (3.15 X 3.94 in)
Recoil starter cable
23
Fasten the wire wariness, fuel
24
tank breather hose and oil tank
breather hose with a clamp.
CABLE ROUTING
8-21
SPEC