Installation - Yamaha VK540EF Service Manual

BRAKE

INSTALLATION

1. Assemble:
D Caliper body
Assemblage steps:
D Lubricate the spiral gears 1 on the caliper
body and lever 2 with silicone grease.
D Align the projection mark 1 on the lever with
the "86" mark 2 on the caliper body, screw the
lever 3 counterclockwise to the caliper body.
D Install the stopper pin 1 into the holes on the
caliper body and stationary cover, then tighten
the bolts (stationary cover).
Bolt (stationary cover):
9 Nm (0.9 mDkg, 6.5 ftDlb)
D Lubricate the one way locks 1 1 and 2 2 with
a lithium grease.
D Lubricate the adjusting screw and back up
plate with a silicone grease.
D Insert the back up plate 1 into the lever shaft
hole 2 .
4-31
POWR
TR