Panasonic KX-FLM652CX Service Manual page 89

6.6.5.3. COPY AND FAX
No. Symptom
1 NO DOCUMENT FEED
(NO DOCUMENT
FEED,DOCUMENT JAM
and MULTIPLE
DOCUMENT FEED.)
(P.110)
DOCUMENT JAM (NO
DOCUMENT
FEED,DOCUMENT JAM
and MULTIPLE
DOCUMENT FEED.)
(P.110)
MULTIPLE DOCUMENT
FEED(NO DOCUMENT
FEED,DOCUMENT JAM
and MULTIPLE
DOCUMENT FEED.)
(P.110)
2 SKEW (ADF) (P.112)
3 THE SENT FAX DATA IS
SKEWED (P.113)
4 THE RECEIVED FAX
DATA IS SKEWED (P.113)
5 THE RECEIVED OR
COPIED DATA
EXPANDED (P.114)
6 BLACK OR WHITE
VERTICAL LINE
COPIED (P.115)
7 AN ABNORMAL IMAGE IS
COPIED (P.116)
Cause
Failed the document sensor lever
Failed the document sensor
Dirty or failed the separation roller
Dirty or failed the separation rubber
Failed the separation spring
Dust or scratch on the document paper path
Failed the gear
Failed the ADF motor
Failed the ADF cover open switch lever
Dirty or failed the separation roller
Dirty or failed the separation rubber
Failed the separation spring
Dust or scratch on the document paper path
Failed the document feed roller
Failed the document guide
The cause of ADF
The cause of scanner glass
Problem with the other FAX machine
The cause of printing
Problem with the other FAX machine
Dirty or failed the drive roller (at ADF)
IS
Dirty or failed the document feed roller (at ADF) Clean or replace the document feed roller
Dirty or failed the separation roller (at ADF)
Failed CIS movement (at SG)
Dirty or failed the white plate (2 places)
IS
Dirty or failed the glass board
The cause of printing
Failed CIS
Dirty or failed the white plate (2 places)
Dirty or failed the glass board
Dirty or failed the drive roller (at ADF)
Dirty or failed the document feed roller (at ADF) Clean or replace the document feed roller
Dirty or failed the separation roller (at ADF)
Failed CIS movement (at SG)
Failed CIS
The cause of printing
Replace the document sensor lever
Go to DOCUMENT SENSOR (P.161)
Clean or replace the separation roller
Clean or replace the separation rubber
Replace the separation spring
Clean the document paper path
Check the gear
Go to ADF MOTOR (P.144)
Replace the ADF cover open switch lever
Clean or replace the separation roller
Clean or replace the separation rubber
Replace the separation spring
Clean the document paper path
Replace the document feed roller
Replace the document guide
Go to SKEW (ADF)(P.112)
----
Go to SKEW (ADF)(P.112)
Clean or replace the drive roller
Clean or replace the separation roller
Replace the belt or the gear or the shaft or the ADF motor
Clean or replace the white plate
Clean or replace the glass board
Go to DARK OR WHITE VERTICAL LINE (P.97)
Go to CIS (Contact Image Sensor) SECTION (P.146)
Clean or replace the white plate
Clean or replace the glass board
Clean or replace the drive roller
Clean or replace the separation roller
Replace the belt or the gear or the shaft or the ADF motor
Go to CIS (Contact Image Sensor) SECTION (P.146)
Go to DARK OR WHITE VERTICAL LINE (P.97)
89
Countermeasure
KX-FLM652CX