Installation - Panasonic KX-FLM652CX Service Manual

Multi-function laser fax
Table of Contents

Advertisement

KX-FLM652CX
3.4.

INSTALLATION

3.4.1.
INSTALLATION SPACE
The space required to install the unit is shown below.
The dimensions given are necessary for the unit to operate efficiently.
Note:
• • • • Avoid excessive heat or humidity.
• • • • Use the unit within the following ranges of temperature and humidity.
• • • • Ambient temperature: 10°C to 32.5°C
• • • • Relative humidity: 20% to 80% (without condensation)
• • • • Power cord length should be less than 5 meters. Using a longer cord may reduce the voltage or cause malfunctions.
• • • • Avoid direct sunlight.
• • • • Do not install near devices which contain magnets or generate magnetic fields.
• • • • Do not subject the unit to strong physical shock or vibration.
• • • • Keep the unit clean. Dust accumulation can prevent the unit from functioning properly.
• • • • To protect the unit from damage, hold both sides when you move it.
• • • • Do not place the unit in an area where the paper tray may be obstructed (i.e., by a wall, etc.)
• • • • Keep this surface ( ) away from walls etc. more than 50 mm to let the unit cool down.
16

Advertisement

Table of Contents
loading

Table of Contents