Panasonic KX-FLM652CX Service Manual page 70

KX-FLM652CX
Test Mode Type of Mode
SENSOR CHECK Service Mode
PRINT TEST Service Mode
PATTERN
Note:
The numbers in the boxes (XXX) indicate the keys to be input for the various test modes.
Code
Operation after code
input
"8" "1" "5" First of all, press the copy button, and confirm the action of ON/OFF.
For each sensor's operation, refer to SENSORS AND SWITCHES SECTION
(P.185).
LCD DISPLAY:
D: Document
D: Document set
-: No document
S: Read position
S: Docu detect
-: No document
C: Cover
C: Cover open
-: Cover close
*: None
*: None
E: Exit
E: Paper detect
-: No paper
R: Registration
R: Paper detect
-: No paper
D: Drum
D: DRUM set
-: No DRUM
T: Toner
T: Toner detect
-: No toner
*: None
3F: Fuser thermistor
3F: 00 (high temp.) - FF (low
temp.)
*: None
DF: Room thermistor
DF: 00 (high temp.) - FF (low
temp.)
*: None
V: VOX
V: VOX detect
-: No VOX
"8" "5" "2" 1. Press "852" then the SET key in the service mode.
2. As "PATNO =" is displayed on the LCD, enter the test pattern No. and press
START
the SET key.
3. When "No. = "is displayed on the LCD, enter the printing number and press the
SET key. (Press "00" for the infinite printing.)
4. "MODE" is displayed on the LCD. Press "0" to start printing or press "1" to go
to the next screen.
5. When "1" is pressed at MODE, "INTVL = "is displayed on the LCD. Enter the
printing interval (00~99 sec).
6. The printing repeats the designated number of times at the programmed
printing intervals.
70
Function
*: None
*: None
T: Paper top
T: Paper detect
-: No paper
*: None
*: None
*: None
*: None
M: MP Tray
M: Paper detect
-: No paper
*: None
*: None
*: None
*: None
*: None
*: None
*: None
*: None