Connecting To A Computer - Panasonic KX-FLM652CX Service Manual

3.3.

CONNECTING TO A COMPUTER

Panasonic Multi-Function Station software enables the unit to carry out the following functions:
- Printing on plain paper, transparencies, labels and envelopes
- Scanning documents and converting an image into text with Readiris OCR software
- Scanning from other applications for Microsoft
- Storing, editing or erasing items in directories using your computer
- Programming the features using your computer
- Sending, receiving fax documents using your computer
To use Multi-Function Station on your computer, the following are required:
Operating System:
Works with Windows 98/Me/2000/XP*
CPU:
®
Windows 98: Pentium 90 MHz or faster
Windows Me: Pentium 150 MHz or faster
Windows 2000: Pentium 166 MHz or faster
1
Windows XP* : Pentium 300 MHz or faster
RAM:
Windows 98: 24 MB (32 MB or more recommended)
Windows Me: 32 MB (64 MB or more recommended)
Windows 2000: 64 MB or more
1
Windows XP* : 128 MB or more
Other Hardware:
CD-ROM drive
Hard disk drive with at least 100 MB of available space
USB interface
*1 Multi-Function Station software does not work with Windows XP Professional x64 Edition (64bit), a new version of Windows
XP Professional that was released in and after April, 2005.
Important notice for the connection
• • • • Do not connect the USB cable before installing Multi-Function Station. Be sure to connect the USB cable in step 6 on
P.29.
Note:
• • • • Be sure to use a Hi-Speed USB 2.0 certified cable if your computer is equipped with the Hi-Speed USB 2.0 interface.
Warning:
• • • • To assure continued emission limit compliance, use only shielded USB cable (2m or less in length).
® ®
Windows that support TWAIN scanning
1
(1) USB cable
If you need a more than 3m USB cable, Order the extension USB cable
kit by service parts route.
Part No. : PFWAFLB851M
15
KX-FLM652CX